Charging-port / lower-sensor branch
Inspect dock flex, connector, barometer/mic-related telemetry path and bus/rail. Substitute a verified known-good flex only when model constraints allow.
IPHONE PANIC-FULL / SENSOR FORENSICS
Read the token.
Read the token.
Prove the hardware path.
Decode panic-full logs into a model-aware diagnostic route: token → subsystem → physical location → bus or rail → confirmation test → repair evidence.
PANIC EVIDENCE CHAIN
LOG
TOKEN
MODEL
DOMAIN
RAIL/BUS
CONFIRM
REPAIR
A panic token can identify a failing telemetry domain. It does not by itself prove which physical part is defective.
01 — MODEL-AWARE PANIC PARSER
Paste the log. Build the diagnostic route.
Choose the family when known. The parser preserves uncertainty where the source mapping is not uniquely component-specific.
02 — WATCHDOG / THERMAL TELEMETRY
Understand the restart timer
The uploaded source emphasizes ~180-second watchdog resets. V3 uses the timing as supporting evidence and requires the actual panic string.
BOOT30s60s90s120s150s180s
Expected: required telemetry continues to check in. Failure: watchdog/panic evidence names the missing subsystem or process.
03 — SENSOR / BUS DATABASE
Model + location + bus + measurement + next proof
The uploaded V2 mappings are preserved as source-derived references; V3 no longer labels a flex or IC replacement as automatically confirmed.
| Token / domain | Source applicability | Physical domain | Bus / rail | Source voltage | Source GR | Confirmation before repair |
|---|
04 — HARDWARE CODE LOOKUP
Hex + decimal + binary + subsystem
Retained from the previous AIFlasher build for fast bench lookup alongside panic tokens.
| Hex | Decimal | Binary | Source description | Diagnostic branch |
|---|
05 — LIVE SENSOR-LINE EVALUATOR
GR + voltage + panic token in one bench view
A reading can support short, leakage, open trace or voltage-state branches; it cannot certify the entire sensor path by itself.
06 — REPAIR TRIAGE
Isolation before replacement
V3 removes percentage-based claims such as “90% solved here” and replaces them with confirmation gates.
Wireless / NFC / thermal branch
Inspect coil/flex, connector, NTC line and post-housing/back-glass repair damage before replacing the assembly.
Battery / BMS telemetry branch
Check battery, connector, telemetry line and series components. A 1% reading supports this domain but does not name one resistor automatically.
Shared-bus branch
Identify the bus and target first. Disconnect plausible loads one at a time and find the device or trace that actually clamps the line.
Storage I/O branch
Confirm NAND power, reset/interface and restore/read-write evidence before NAND reball or replacement.
Always-On Processor branch
Check AON rail stability, peripherals and panic context. AOP watchdog text alone is not justification for SoC/PMIC reball.
07 — FORENSIC CASE DOSSIER
Preserve what the log actually proved
Generate a standardized text record from the latest parser result and bench measurements.