Home › Panic codes › iPhone 13 / 13 mini / 13 Pro / 13 Pro Max › 0x800
SMC panic · sensor array code
iPhone 13 / 13 mini / 13 Pro / 13 Pro Max panic 0x800 (2048)
Charge-port assemblyMulti-source
Models: iPhone 13 Pro / iPhone 13 Pro Max / iPhone 13 mini / iPhone 13 · boards d63, d64, d16, d17
Log line: S.sensor array 0 - 7 is … with 2048 (or 0x800) in word 1.
Where to look: Charge-port flex / connector
Confirmed: an iPhone 13 Pro Max with sensor 0x800 stopped restarting after the charging port assembly was replaced.
Bench checks
- Swap-test with a known-good OEM/premium flex; the flex must be plugged in while testing (an unplugged sensor flex also causes the 3-minute restart).
- Inspect for damaged or missing resistors around the charge-port connector.
Sources
- Repair Wiki - iPhone 13 randomly restarts (accessed 2026-09-26)
- iPad Rehab (Jessa Jones) - Troubleshooting iPhone reboot problems (accessed 2026-09-26)
- iFixit - iPhone SMC Panic Assert (accessed 2026-09-26)
- iFixit Answers - iPhone 13 Pro Max sensor 0x800: charging port assembly replaced, fixed (accessed 2026-10-02)
Hinglish me
iPhone 13 / 13 mini / 13 Pro / 13 Pro Max me 0x800 (2048) ka matlab: Charge-port assembly.
Kahan dekhein: Charge-port flex / connector
Known-good OEM/premium flex laga ke swap-test karo; test karte waqt flex connected hona chahiye (sensor flex nikla hua ho to bhi 3 minute wala restart aata hai).
Charge-port connector ke aas-paas damaged ya missing resistors check karo.