Home › Panic codes › iPad Air 11-inch (M2) Wi-Fi 0x200000
SMC panic · field report (unverified)
iPad Air 11-inch (M2) Wi-Fi panic 0x200000 (2097152)
No confirmed part yet.Lead, not a mapping
Matching iPad Air 11-inch (M2) field report — cause unverified
A public iPad Air 11-inch (M2) Wi-Fi report shows 0x200000 after liquid exposure, with restarts every 2-3 minutes. Screen replacement and board cleaning did not fix it, and the thread has no answer. This is a lead, not a part mapping.
Bench checks
- Read the word position from the original panic-full file; the public report does not state it.
- After liquid exposure, check every flex connector and the board area under each connector for residue or corrosion, not only visible areas.
- Isolate with known-good connected parts one at a time and run past 3 minutes; an unplugged sensor flex can itself cause the watchdog restart.
- Do not apply iPhone code tables to this iPad: sensor-array layouts are model-specific.
Same number on other iPhones (context only)
| Model family | Meaning there |
|---|---|
| iPhone 14 / 14 Plus | Front sensor / proximity flex |
| iPhone 15 / 15 Plus | Wireless-charging flex (back glass) |
| iPhone 15 Pro / Pro Max | Proximity flex |
| iPhone 16 / 16 Plus | Wireless-charging flex (log value 2097152) |
| iPhone 16 Pro / Pro Max | Charge-port flex - or proximity (sources disagree) |
| iPhone 17 Pro / Pro Max | Upper flex (single vendor list) |
Sources
- iFixit Answers - iPad Air 6 11" panic full sensor array 0x200000 (unanswered) (accessed 2026-09-29)
Hinglish me
Milta-julta iPad Air 11-inch (M2) field report — cause verify nahi hua
Ek public iPad Air 11-inch (M2) Wi-Fi report me liquid lagne ke baad 0x200000 aaya, har 2-3 minute me restart. Screen badalne aur board saaf karne se theek nahi hua, aur thread me koi jawab nahi. Ye sirf lead hai, part mapping nahi.
Word position original panic-full file se padho; public report me ye nahi likha.
Liquid ke baad har flex connector aur uske neeche ka board area residue ya corrosion ke liye check karo, sirf dikhne wali jagah nahi.
Ek-ek karke known-good part laga ke (connected) isolate karo aur 3 minute se zyada chalao; nikla hua sensor flex khud bhi watchdog restart karwa sakta hai.
Is iPad par iPhone ki code table mat lagao: sensor-array layout har model ka alag hota hai.
Fixed one? Record the part in the decoder's “Record the fix” box — confirmed repairs turn this page into a verified mapping.